An orange cat sleeps on a neatly made bed with dark grey bedding in a minimalist bedroom with wall sconces and a mounted air conditioner.

Mini Split Installation in Durant, OK

A new system here will heat from November through March and cool from May through September every year. Tell us about the house, and a licensed contractor who covers Bryan County will get in touch.

Tell us about the job

It takes about a minute.

Step 1 of 3: Equipment
An orange cat rests on a dark grey bed in a minimalist monochrome bedroom.

Ten months of work either way

A mini-split in Durant works most of the year. Winter nights average 34°F from November through March, and summer afternoons hit 93°F from May through September. That is 10 months of heating or cooling, with only a short stretch where the unit gets to rest.

Most homes here already heat with electricity, so a mini-split fits how the area is set up. Any unit installed new has to meet the federal minimum of 14.3 SEER2 for cooling and 7.5 HSPF2 for heating. Bryan County has seen 50 damaging wind events over the past ten years, and a mini-split that loses power will start back up on its own once power returns.

5 months
November through March, your system heats
5 months
May through September, it cools
34°F
the average winter night it heats against
93°F
the average summer afternoon it cools against
Isometric illustration of a cutaway house showing two wall-mounted mini-split indoor units connected by line sets to an outdoor condenser on a pad outside.
Your system heats November through March and cools May through September.

NOAA nClimDiv, 1991–2020 normals

Oklahoma requires HVAC contractors to hold a state license.

That license belongs to the contractor as a business, not to this particular mini-split job. The Construction Industries Board is the state body that licenses HVAC contractors in Oklahoma, so the credential covers the company taking on your work, not a sign-off on the installation itself.

Most cities and counties in Oklahoma require a permit for a mini-split installation, along with an inspection once the work is done. That permit and inspection are handled by the local building office, separate from the state license, and they are what checks the line set, wiring and mounting on this specific job.

Source: Oklahoma State Legislature

Is a mini split worth it?
For most homes, yes, especially if you're heating or cooling a room that isn't on the ductwork, like a garage conversion or an addition. A mini split puts a heat pump right in the room, so it heats and cools without losing air through ducts. Durant needs heat from November through March and cooling from May through September, so a system that does both from one unit is working most of the year here. Whether it's worth it for your house depends on what you're trying to condition and what's there now, and a contractor can walk through that with you.
How many rooms can a mini split cover?
A single indoor unit covers one room or one open area. If you need to cover several rooms, a multi-zone system runs more than one indoor unit off a single outdoor unit. Each indoor unit is sized to the room it's in, so a contractor will look at each space separately rather than the house as a whole.
Can a mini split heat a whole house?
It can, but it takes the right setup. A single indoor unit heats the room it's in and whatever space is open to it. To heat a whole house you need either a multi-zone system with an indoor unit in each main area, or a ducted mini split system that ties into ductwork. Winter nights here average 34°F, so whatever setup you choose needs to be sized to keep up on the cold nights, not just the mild ones.